 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20769 rev. A 08/03 20CTH03 20CTH03S 20CTH03-1 20CTH03FP Hyperfast Rectifier Features * * * * Hyperfast Recovery Time Low Forward Voltage Drop Low Leakage Current 175C Operating Junction Temperature trr = 35ns max. IF(AV) = 20Amp VR = 300V Description/ Applications International Rectifier's 300V series are the state of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop and Hyperfast recovery time. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as freewheeling diodes in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. Absolute Maximum Ratings www..com Parameters VRRM IF(AV) Peak Repetitive Reverse Voltage Average Rectified Forward Current @ TC = 135C (FULLPACK) IFSM TJ, TSTG Non Repetitive Peak Surge Current @ TJ = 25C Operating Junction and Storage Temperatures @ TC = 160C Per Diode Per Diode Per Device Max 300 10 20 120 - 65 to 175 Units V A C Case Styles 20CTH03 20CTH03S 20CTH03-1 20CTH03FP Base Common Cathode 2 Base Common Cathode 2 Base Common Cathode 2 2 1 2 Common Cathode 3 1 2 Common Cathode 3 1 2 Common Cathode 3 1 Anode Anode Anode Anode Anode Anode Anode Common Cathode 3 Anode TO-220AB www.irf.com D2PAK TO-262 TO-220 FULLPACK 1 20CTH03, 20CTH03S, 20CTH03-1, 20CTH03FP Bulletin PD-20769 rev. A 08/03 Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameters VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage Min Typ Max Units Test Conditions 300 V V V A A pF nH IR = 100A IF = 10A, TJ = 25C IF = 10A, TJ = 125C VR = VR Rated TJ = 125C, VR = VR Rated VR = 300V Measured lead to lead 5mm from package body 1.05 1.25 0.85 0.95 6 30 8 20 200 - IR Reverse Leakage Current - CT LS Junction Capacitance Series Inductance - Dynamic Recovery Characteristics @ TC = 25C (unless otherwise specified) Parameters trr Reverse Recovery Time Min Typ Max Units Test Conditions 31 42 2.4 5.6 36 120 35 30 nC A ns IF = 1A, diF/dt = 50A/s, VR = 30V IF = 1A, diF/dt = 100A/s, VR = 30V TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 25C TJ = 125C IF = 10A diF/dt = 200A/s VR = 200V IRRM Peak Recovery Current - Qrr Reverse Recovery Charge - Thermal - Mechanical Characteristics Parameters TJ TStg RthJC Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to Case Per Diode Fullpack (Per Diode) Min - 65 - Typ - Max 175 175 1.5 3.9 Units C C/W 2 www.irf.com 20CTH03, 20CTH03S, 20CTH03-1, 20CH03FP Bulletin PD-20769 rev. A 08/03 100 (mA) 100 10 1 0.1 Tj = 175C 150C 125C 100C 75C 50C Reverse Current - I (A) R 0.01 0.001 50 25C Instantaneous Forward Current - I F Tj = 175C Tj = 125C 100 150 200 250 300 10 Tj = 25C Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 1000 (pF) T J = 25C Junction Capacitance - C T 100 1 0.4 10 0.6 0.8 1 1.2 1.4 1.6 1.8 2 0 50 100 150 200 250 300 Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 10 (C/W) thJC Thermal Impedance Z 1 0.1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance) Notes: PDM t1 t2 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics www.irf.com 3 20CTH03, 20CTH03S, 20CTH03-1, 20CTH03FP Bulletin PD-20769 rev. A 08/03 10 (C/W) thJC Thermal Impedance Z 1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Notes: PDM t1 t2 0.1 Single Pulse (Thermal Resistance) 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 t1, Rectangular Pulse Duration (Seconds) Fig. 5 - Max. Thermal Impedance Z thJC Characteristics (FULLPACK) 180 Allowable Case Temperature (C) Allowable Case Temperature (C) 180 170 160 150 140 130 Square wave (D = 0.50) 120 Rated Vr applied 170 DC DC 160 Square wave (D = 0.50) 150 Rated Vr applied see note (2) 110 see note (2) 100 0 2 4 6 8 10 12 14 16 F(AV) 140 0 2 4 6 8 10 12 14 16 (A) F(AV) Average Forward Current - I Average Forward Current - I (A) Fig. 6 - Max. Allowable Case Temperature Vs. Average Forward Current Fig. 7 - Max. Allowable Case Temperature Vs. Average Forward Current (FULLPACK) 20 Average Power Loss ( Watts ) 16 RMS Limit 12 8 4 0 0 2 4 6 8 10 12 14 16 Average Forward Current - IF(AV) (A) Fig. 8 - Forward Power Loss Characteristics DC D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 8); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR 4 www.irf.com 20CTH03, 20CTH03S, 20CTH03-1, 20CH03FP Bulletin PD-20769 rev. A 08/03 100 IF = 10A 1000 IF = 10A Tj = 125C Qrr ( nC ) trr ( ns ) Tj = 125C 100 Tj = 25C Tj = 25C Vr = 200V Vr = 200V 10 100 1000 10 100 1000 di F /dt (A/s ) Fig. 9 - Typical Reverse Recovery vs. di F /dt di F /dt (A/s ) Fig. 10 - Typical Stored Charge vs. di F /dt Reverse Recovery Circuit VR = 200V 0.01 L = 70H D.U.T. dif/dt ADJUST diF /dt D G IRFP250 S Fig. 11- Reverse Recovery Parameter Test Circuit www.irf.com 5 20CTH03, 20CTH03S, 20CTH03-1, 20CTH03FP Bulletin PD-20769 rev. A 08/03 3 IF 0 t rr ta tb 4 2 Q rr I RRM 0.5 I RRM di(rec)M/dt 0.75 I RRM 5 1 diF /dt f 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 13 - Reverse Recovery Waveform and Definitions Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 123 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10) 0.10 (0.004) Base Common Cathode 2 1.32 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2 1.22 (0.05) 2.92 (0.11) 2.54 (0.10) TERM 2 123 4.57 (0.18) 4.32 (0.17) 1 0.61 (0.02) MAX. Anode 2 Common Cathode 3 Anode 5.08 (0.20) REF. Conforms to JEDEC Outline TO-220AB Dimensions in millimeters and (inches) 6 www.irf.com 20CTH03, 20CTH03S, 20CTH03-1, 20CH03FP Bulletin PD-20769 rev. A 08/03 Outline Table 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) 3X BASE COMMON CATHODE 2 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED FOOTPRINT 11.43 (0.45) 1 1 2 3 ANODE COMMON ANODE CATHODE 1 2 3 4.57 (0.18) 4.32 (0.17) 2 0.61 (0.02) MAX. 5.08 (0.20) REF. 8.89 (0.35) 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) Conforms to JEDEC Outline D2PAK Dimensions in millimeters and (inches) 2X 2.54 (0.10) 2X BASE COMMON CATHODE 2 1 2 3 ANODE COMMON ANODE CATHODE 1 2 Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) www.irf.com 7 20CTH03, 20CTH03S, 20CTH03-1, 20CTH03FP Bulletin PD-20769 rev. A 08/03 Outline Table 2 1 Anode Common Cathode 3 Anode Conforms to JEDEC Outline TO-220 FULLPACK Dimensions in millimeters and (inches) Ordering Information Table Device Code 20 1 C 2 T 3 H 4 03 5 -1 6 1 2 3 4 5 6 - Current Rating (20 = 20A) C T H = Common Cathode = TO-220, D2Pak = HyperFast Recovery Voltage Rating (03 = 300V) None = TO-220AC S "-1" FP = D2Pak = TO-262 Option = TO-220 FULLPACK 8 www.irf.com 20CTH03, 20CTH03S, 20CTH03-1, 20CH03FP Bulletin PD-20769 rev. A 08/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 08/03 www.irf.com 9 |
Price & Availability of 20CTH03
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |